The Turtle Trading system is a well-known trend-following strategy created by Richard Dennis and William Eckhardt in the 1980s. Their idea was simple yet groundbreaking: anyone could become a successful trader if they followed a clear set of rules. To prove this, Dennis and Eckhardt handpicked a group of complete beginners, dubbed the Turtles, and taught them a specific set of trading guidelines. The experiment validated their theory and turned the Turtles into successful traders.
This cTrader ABCD pattern indicator is a simple but effective technical analysis tool used in trading to identify and highlight a specific chart pattern for bullish or bearish trends. Forex and other markets often use the pattern to predict potential price reversals or continuations.
This Support and Resistance Extreme indicator uses the standard support and resistance formulas, with Daily highs and lows and extreme highs and lows. It also helps traders identify overbought and oversold signals and highlight key support and resistance zones, making it easier to fine-tune trading decisions.
This Support and Resistance RSI indicator uses the standard support and resistance formulas with a Relative Strength Index (RSI) indicator. This indicator helps traders identify overbought and oversold signals and highlight key support and resistance zones, making it easier to fine-tune trading decisions.
A support and resistance indicator helps you spot key price levels where an asset tends to bounce or stall. Support is like a floor where the price stops falling because buyers step in, while resistance is like a ceiling where the price struggles to move higher because sellers take over. These levels help figure out when to enter or exit a trade.
A Pivot Point High Low Indicator is a technical analysis tool used in trading to identify potential support and resistance levels in a financial market. Pivot points are calculated based on a previous trading period's high, low, and closing prices (such as the last day, week, or month). This indicator helps traders determine the market's overall trend and anticipate potential price movements.
This cTrader indicator uses the Commodity channel index, Welles Wilder Smoothing and Heiken-Ashi indicators together to give you a positive indication of the trend direction. This is a well-balanced trade signal tool to help you make informed decisions on when to both enter and exit a trade.. Pop-up, Telegram & Email Alerts Included.
The cTrader Starfield Trading is an excellent technical indicator that provides a lot of useful information about market volatility, the trend direction, trend continuation, market consolidation and upcoming volatility breakouts. Now you can see what is happening in the markets with Telegram & Email Alerts.
This cTrader Forex Market Signals indicator by Starfield Trading is derived from Dynamic RSI, Bollinger bands and trend signal to provide the perfect signals for manual trading or even to incorporate into an automated trading system. Telegram & Email Alerts, so you never miss a signal.
The Chandelier Exit (CE) is a volatility-centric indicator devised by Chuck Le Beau, a renowned authority on exit strategies. It effectively pinpoints stop-loss exit points for both long and short trading positions. Knowing when to exit a losing trade is a big bonus when trading the financial markets. Telegram & Pop Up Alerts included.
The cTrader Fractal Channel indicator is a technical analysis tool that helps identify potential price trends and support/resistance levels in financial markets. It's based on the concept of fractals, which are self-similar patterns that repeat at different scales. In trading, fractals are used to identify significant price levels.Telegram & Pop Up Alerts included.
A stop and reverse (ATR) indicator, also known as Average True Range (Stop and Reverse), is a technical analysis tool primarily used by traders to determine potential reversal points in the price direction of an asset. It's often employed in trend-following trading strategies.
The cTrader platform does not have an automated advanced protection feature for trades that open in the future like automated or pending orders, this tool will protect your exposed market orders while you are away from your desk. There are 5-take profit targets, a break-even stops, trailing stop loss and stealth stops.
The cTrader Moving Average Trailing Stop is an automated trading system that can manage your stop loss for new and existing orders by trailing it behind the price of an instrument based on the cTrader standard MA indicator which is provided for free. A moving average is a default indicator that is commonly used in technical analysis.
This cTrader robot will automatically send you an Instant Pop-up, Email or Telegram message when one of your positions is opened or closed, it was initially designed for our customers so that they know when one of the automated trading systems opens or closes a position so that they can analyse the trade.
This is a community-based organically grown project for the more advanced trader who wishes to start using the features of a semi-automated trading system to complement their existing strategies. The core engine uses smart-grid logic combined with advanced risk management and multi-timeframe technical trend indicators.Trade multiple symbols at the same time.
This starter kit for algo developers uses an open-source Multi-Timeframe cTrader Relative Strength Index Strategy, it can automatically open, close and manage positions for the cTrader Desktop platform. The strategy also uses built-in risk management and the ability to send Telegram trade signals.
This product is for educational purposes only. Full Source Code Included.
This starter kit for algo developers uses an open-source Multi-Timeframe cTrader Hull & Simple Moving Average Strategy, it can automatically open, close and manage positions for the cTrader Desktop platform. The strategy also uses built-in risk management and the ability to send Telegram trade signals.
This product is for educational purposes only. Full Source Code Included.
This is a classic Relative Strength Index (RSI) trading and signal robot, it is very good at predicting trend and price movement with signals that tell you when an instrument is oversold or overbought, use it as an auto-trader and also receive instant signals via email and a window pop-up.
This is a collection of 10 of the most popular currency pairs, it uses over 60 technical indicators to identify strong bullish or bearish trends. This trading system also includes good risk management including high-impact news management to pause trading and close trades before any major news events. Optimisation is easy & quick with good backtest results.
This trading system is a community-driven project which is based on the Waddah Attar Explosion indicator for entry signals and a variety of trend indicators to help determine the trend. Also, included are risk management and profit-locking features to maximise your net profit and help reduce your equity drawdown. As a bonus, the system also provides instant Telegram and Email trade signals.
This cTrader Neptune EURUSD trading system uses over 60 trend-based indicators, risk management and integrated high-impact news event control to pause trading and close trades before a major news event. It is easy and quick to optimise the settings for historical data. This currency symbol is the value of the Euro (EUR) relative to the US Dollar (USD).
The cTrader Moving average trading system automatically enters and exits trades based on moving average indicators that cross above or below each other, you have 8 different types of moving average to choose from together with adjustable parameters to customise this robot for any symbol.
This cTrader Neptune EURGBP trading system uses over 60 trend-based indicators, risk management and integrated high-impact news event control to pause trading and close trades before a major news event. It is easy and quick to optimise the settings for historical data. This currency symbol is the Euro (EUR) relative to the English Pound (GBP).
Traders who just want a simple method to lock in their profits or reduce their losses can use this cTrader cBot (robot) that will make sure that your profit and loss targets are managed correctly. This tool can close all open orders as well as pending orders.
Would you like to communicate with your cTrader trading platform with a few simple words? We have developed a prototype voice recognition trading assistant that will allow you to talk to the trading platform. While voice-activated trading is just starting to be used in the market, you will see that it will become a more popular feature in the years ahead. [ENLISH ONLY]
This version of the cTrader DiNapoli Stochastic indicator is smoother with additional logic to match the curve of the lines to identify early price reversals using linear regression curve fitting with Polynomial Interpolation.
This automated trading strategy uses the Hull Moving Average (HMA) indicator, created by Alan Hull, for swift and smooth calculation; it eliminates lag and provides excellent signals to enter and exit trades. This system can also send instant alerts with Popup, Email, and Telegram notifications and has automatic news event integration. It works best with Gold.
This cTrader cBot contains example source code demonstrating how to easily send Telegram alerts from your cBots or indicators with a few lines of code written in Microsoft C# which can be used for status updates or trade signals. The example is suitable for beginner coders looking at adding new features to their systems.
This basic starter kit for algo developers uses a cTrader Detrended Price Oscillator (DPO) trading system to open and close trades based on the standard DPO indicator built into the trading platform. This strategy opens trades based on the DPO's last calculated value being greater or less than zero. This cBot includes the full source code for modifications.
This basic starter kit for algo developers uses a cTrader Donchian Channel trading system to open and close trades based on the standard Donchian Channel indicator built into the trading platform. This strategy opens trades based on the candle's low or high prices breaking pass the indicator's top or bottom price lines, these are known as breakout signals. This cBot includes the full source code for modifications.
This basic starter kit for algo developers uses a cTrader Fractal Bands trading system to open and close trades based on the standard Fractal Bands Chaos indicator built into the trading platform. It works by checking reversal points in the markets and it will determine when to open and close buy and sell trades. This cBot includes the full source code for modifications.
This basic starter kit for algo developers uses an open-source cTrader Bill Williams Alligator trading system to open and close trades based on the standard alligator indicator built into the trading platform. It works by checking the alligator's teeth and lips to determine when to open and close buy and sell trades.This cBot includes the full source code for modifications.
The cTrader Anchored VWAP (Volume-Weighted Average Price) indicator assesses the average price at which a symbol has traded over a specific period of time, this is defined by the user dragging a vertical line on the chart to anchor the start of the calculation. The indicator is calculated by adding up the products of the price and volume for each trading period and then dividing by the total trading volume over that period.
This basic starter kit for algo developers demonstrates how to implement a Trailing Stop Loss (TSL) into their existing cBot to automatically lock in profits. A trailing stop-loss is a type of stop-loss order used in trading and investing to protect profits and limit potential losses
This basic starter kit for algo developers uses an open-source cTrader Stochastic Oscillator indicator which is a popular technical analysis indicator used in financial markets to assess the momentum and potential reversal points of an asset's price. This cBot will automatically open, close and manage trades based on the values of the SO indicator.
This basic starter kit for algo developers uses an open-source cTrader Aroon indicator to automatically open and close trades. The Aroon indicator is a technical analysis tool used to assess the strength and direction of a trend in a financial market. This trading strategy works by looking for crossovers between the Aroon-Up and Aroon-Down lines
This basic starter kit for algo developers uses an open-source cTrader Accumulative Swing Index (ASI) indicator to automatically open and close trades. The ASI is a technical analysis indicator used primarily to evaluate the long-term trend and to assess the strength of a trend in financial markets.
This basic starter kit for algo developers uses an open-source cTrader On Balance Volume (OBV) indicator, this is a popular technical analysis tool used by traders to analyze the flow of volume in relation to price movements. This strategy also includes a simple moving average as a confirmation for trade entries and exits.
This basic starter kit for algo developers uses an open-source cTrader SuperTrend indicator, this is a popular technical analysis tool used by traders and investors to identify the direction of a trend and also the potential entry & exit points for your trades in the financial markets.
This basic starter kit for algo developers uses an open-source cTrader Welles Wilder Smoothing (WWS) trading system to open and close trades based on two WWS indicators, a fast and a slow crossing each other. Once the smoothing is calculated, you can generate trading signals based on the smoothed data. This cBot includes the full source code for modifications.
This basic starter kit for algo developers uses an open-source cTrader Relative Strength Index (RSI) trading system to open and close trades based on the indicator value moving above and below the overbought and oversold levels. The RSI is based on the concept that when prices rise, there is typically increased buying pressure, and when prices fall, there is increased selling pressure.
This basic starter kit for algo developers uses an open-source cTrader Parabolic SAR Trailing Stop, this fully working cBot will set a stop loss on an open position to follow the Parabolic SAR dots for extra risk management. Risk management is one of the most important aspects of trading, and having a stop-loss will protect you from margin calls and significant losses.
This basic starter kit for algo developers uses an open-source cTrader Parabolic SAR trading system, this strategy will open trades based on bullish or bearish candlesticks and the signals from the Parabolic SAR indicator when it shows opportunities to enter a trade.
This basic starter kit for algo developers uses an open-source cTrader Average True Range (ATR) trading system, this strategy will open trades based on bullish or bearish candlesticks and place a stop loss and take profit where the distance is calculated using the average true range indicator values.
This basic starter kit for algo developers is a good start at adding risk management to your automated trading strategy, the cBot will close all open trades at a set time in the day. This can be used to close trades just before the market stops trading for a particular symbol. The source code is included to help you add this feature to your existing trading robot.
This basic starter kit for algo developers uses an open-source cTrader Simple Moving Average trading system to open and close trades based on two SMA indicators crossing. A simple moving average (SMA) is an arithmetic moving average calculated by adding recent prices and then dividing that figure by the number of time periods in the calculation average. This trading robot uses two SMA indicators to open and close trades.
This basic starter kit for algo developers uses an open-source Bollinger Band trading system to open and close trades based on indicator signals. John Bollinger created the indicator during the early 1980s, aiming to challenge the prevailing notion that volatility remains constant. Recognizing its dynamic nature, Bollinger sought a versatile tool capable of adjusting trading bands and capturing volatility.
This open-source cTrader Moving Average Convergence Divergence (MACD) trading system is designed to help traders gauge the strength and direction of a trend. This is achieved by plotting two moving averages on a chart, one calculated over a shorter time period and the other over a longer time period and automatically submitting orders.
This open-source cTrader Hull Moving Average (HMA) trading system is based on the popular technical indicator used in financial markets to smooth price data and identify trends more effectively. The indicator was originally developed by Alan Hull and introduced in 2005. The basis of this strategy is that it opens and closes trades when the fast and slow HMA lines cross each other for a possible bullish or bearish trend.